Tattoo on Finger? Fading, Pain, Etc Question....?

A great idea, but you might want to consider a different location? Just a thought. Maybe an image that goes well with those words to go elsewhere on the body? I have a friend who had her wedding ring tattooed on. She said it was not bad. It was like a shallow paper cut. She got it 2 years ago and it's started to smudge already. They never fully fade but do smudge bad. You will have an awful green mark there in the end (like something you've tried to erase but wo not go fully away). Cost will be AT LEAST $60 just to get all the ink and needles set up. From there it depends on the artist. Probably no more than $100-$150. You can always go in and get a quote though. Do not expect the quality of the tattoo to be very good, no matter where you get it, simply because that's a difficult location to get the tattoo gun.

Tattoo on Finger? Fading, Pain, Etc Question....? 1

1. To tax professionals: If you filed a fraudulant schedule C how would the IRS ever find out?

There are at least three methods the IRS use: 1. They track income through information reports. If your business is subject to 1099 information return reporting the IRS will compare your income to what other businesses report paying you. If you report less... then you are caught. 2. The IRS has statistical figures for other business in the same industry. They compare your reported income and expenses with the income and expense of "like businesses" to see if you are within "normal" guidelines. This is called a DIF audit. (Discriminate Function System) For instance, if you are in the retail flower business and report cost of goods sold as 89% and the average cost of good sold in the retail flower business is only 65% then their computers will catch the discrepancy and you have an increased chance of an audit. About 75% of the audits performed are DIF audits. Therefore, if you "guess wrong" on expenses as compared to their statistical model for your type of business you increase your chances of an audit substantially. 3. The IRS performs compliance audits. These are TCMP audits (Taxpayer Compliance Measurement Program) These are miserable audits as the taxpayer is required to substantiate virtually every number on the tax return. I believe that the IRS has suspended doing these audits for the time being... but with the IRS there is always the possibility of reinstatement. Your biggest fear should be the DIF audit. Self-emplopyed individuals are under the IRS radar because they historically under report income. When you combine that scrutinity with the possibility of hitting a DIF flag because your reported information falls outside of the "norm" then you have substantially increased your chance of audit. If you are audited for any reason the IRS may include the schedule C as a subject of audit. If you do not have adequate records to verify your income and expenses... you are toast.

2. Hey guys, i have a Sony surround sound system for my home theater system.?

For me that's all approximately inputs and outputs. settle on the way you prefer to connect all your kit, notwithstanding in case you prefer to apply the amp to technique all indicators or in case you prefer to pass some to maintain on inputs. the 2d element that comes up is the means tocontinual my audio gadget and sub-woofer. Matching a receiver to audio gadget is tremendously concern-free on the grounds which you are in simple terms making specific the amp is rated the two to the finished volume of means your audio gadget are rated for. ideally you may desire to exceed this, yet that often pushes the cost as much as boot, yet you will additionally circulate into extra constructive factors and inputs and outputs too.. additionally except you like procuring new receivers each and every couple years plan some destiny-proofing into it. do you decide on ipod connectivity or extra effective inputs which you do not choose maximum suitable now, yet what if later you purchase some thing else? additionally issues like turntable inputs and XM/Sirius Radio purposes could be substantial to you in addition to could, or possibly you will upload a PVR in the subsequent whilst. some amps even have wireless geared up in for networking. finally, i pass via cost. So once I've picked some fashions that meed the 1st standards, i am going to shrink that record somewhat with the 2d selection, and in many cases cost is the place it narrows all the way down to a pair fashions. right here it turns right into a count number of selection or perhaps brandname

Tattoo on Finger? Fading, Pain, Etc Question....? 2

3. Netbook vs Notebook for Remote Monitoring

I do all of that, except for the Visual Studio, with an old "first gen" Eee 701 4G netbook. (7" screen, 4 GB SSD, upgraded to 1GB ram). I have it running XP Pro and primarily use it for RDP and SSH on remote servers -- Neither of those demand much for horsepower. My mail is web based (google apps) as is most of my office stuff.Insanely portable and light and works great with my Sprint 3G USB stick. Cost? Got it free with a printer from newegg. ..IMHO: If you really gotta have Visual Studio, you will definitely want a more modern processor, more memory and at least a 10" panel if you stick with the netbooks

HOT PRODUCTS
sin datos
GET IN TOUCH WITH US
Artículos recomendados
Upper Bound for Martingale at a Stopping Time
Upper Bound for Martingale at a Stopping Time
For each $omega$, if $1 le n le tau(omega)$ then we have $|M_n-1(omega)| le h$ and so $$|M_n(omega)| le |M_n-1(omega)| |M_n(omega) - M_n-1(omega)| le h h 2h quad texta.s. $$by your third condition. When $ell 0$ the result is trivial, and otherwise we have $1 le tau wedge ell le tau$, so applying this with $ntau(omega) wedge ell$ we get $|M_tau wedge ell| le 2h$ a.s. Squaring and taking expectations gives the desired result. (You can treat $ell0$ as a special case.)Your first condition seems to be unnecessary for this.For your last question, yes, $tau wedge ell$ is a stopping time. More generally, it is a good exercise to show that if $tau, sigma$ are stopping times then so is $tau wedge sigma$. Constants are also stopping times.• Related QuestionsAt what voltage per cell should I store a LiPo?This question seems to be quite the debate in many places. However, the general consensus falls between 3.7 and 3.85v per cell. You can find a similar inquiry here: Storing at 3.7 or 3.85v and here: LiPo storage voltageIt seems that generally, the difference between storage charging to 3.7v, 3.8v, or 3.85v is negligible for most people. However, I would recommend 3.7-3.8v per cell. I store my LiPos at 3.8v per cell and all of my year-old LiPos perform almost like they are brand new.The exact voltage you storage charge LiPos is important, but it is even more important that you just take good care of them and do storage charge them. It's better to storage charge LiPos to a close enough voltage than to not storage charge them at all.Here is a pretty useful guide to LiPo batteries: Guide to understanding LiPo batteries------how to truncate a line along the same slope at a given boundary?I'd suggest you to use vector formulas and at the end unfold them to X and Y coordinates. So, the function of your line is $r_0tcdot (r_1-r_0)$ with a scalar parameter $t$, where $r_0(4,4)$ and $r_1(6,7)$. Then boundaries of your rectangle comes into play. The top boundary has equation $y5$.$r_0ytcdot (r_1y-r_0y)5$$tfrac5-r_0yr_1y-r_0y$ (found $t$)$x$ of the intersection point $r_0xtcdot (r_1x-r_0x)$.For 4 boundaries you will have 4 intersection points. But your line obviously has 2 points of intersection with the rectangle. You chose intersection points based on the values of $t$. (Do not forget that every intersection point has a $t$ parameter.) Namely, trash 2 intersection points with the least $t$ and the greatest $t$. (I hope it is clear what I'm saying here.)------Entropy at zero kelvin for pure atom crystalYou seem to underline some perceived inherent difference between water and elemental compounds. There is none. A crystal of water ice, so to put it, is as crystalline as any other crystal.There are quite a few crystals (indeed, certain elemental compounds are among them) that exhibit some kind of disorder; as you lower the temperature, their molecules (or atoms, or ions) freeze in somewhat different positions having nearly the same energy, so if you extrapolate to zero, you'll see that they retain some significant entropy even then. This has nothing to do with the Third law. These crystals are not ideal by a wide margin, and they are not going to become more ideal anytime soon, especially if you keep them near the absolute zero.On a side note, the words "practice" and "at 0 K" do not sit well together, but that's another story.------What can I cure at 15c and 50% humidity?This is pretty close to the temperature and humidity of the closet where I store wine and hang salumi to cure. I've had the most success with pancetta, lomo, and brasola. I've had some successes and some failures with dried sausages and salami, usually related to undesirable mold that I didn't catch in time. I probably wouldn't hang an entire pork leg, in an effort to make something like a prosciutto. Generally, because of the cost and labor involved, I would want the conditions to be more precise and less variable. In my wine closet, the temp and humidity does change. However, for the smaller items I am playing with, and given the time necessary, the conditions are just fine. It sounds like a reasonable place to experiment. One final note, be sure your space is insect and rodent-free. That could be a potential issue.------How to prove that any line contain at least three points?This is a strange definition, and not the normal set of axioms I usually see. It is possible that, for whatever reason, the author wants to include degenerate cases, such as the empty space, a single point, or a line with two points.Maybe you can give the rest of the definition, instead of just the axioms? For example, I find it odd that planes are referred to in these axioms. Are these axioms explicitly for a projective 3-space?One set I usually see for projective plane/space is:(Although if you want to talk more generally about a projective geometry there may be reasons you don't want to exclude the projective line. Also you sometimes want to explicitly include all of the subgeometries of each dimension as objects that are part of the geometry, instead of defining them in terms of points and lines.)------At what angle does the stone have to be hit? duplicateWithin a total angle of $4arcsinfrac5.5(12times87)5.5$ or approximately 1 degree 12 minutes 3.8175 seconds. It should be noted that the configuration shown in your diagram cannot be attained without curling the path of the moving stone, because when the two stones become tangent at the furthest extent of the possible contact angle, the center of the moving stone is not yet up to the line that you have the three tangent stones shown at. At the point when the moving stone is going to be minimally tangent to the stationary stone the distance between the point of release and the center of the moving stone should equal the distance between the point of release and the center of the target stone. 87 feet 5.5 inches, in other words. The 5.5 inches is the radius of a stone, of course.By the way, from what part of Canada are you?.------$6$ persons stand at random in a queue for buying cinema tickets individuallyIf $F$ denotes a person with five rupee note and T denotes the person with a ten rupee note, then we need arrangements such that the number of F is more than the number of T at any point in the queue. This is equivalent to finding the number of paths from the lower left corner to the upper right corner in the figure that lies below the diagonal line. Counting the number of ways or reaching each grid point, the number of favorable cases is 5.Arrangements of 6 persons in the queue is $frac6!3!3!$, since we are interested only in all getting tickets. Thus the probability is $frac520 frac14$.More generally, if there are $n$ persons with five rupee notes and $n$ persons with ten rupee notes, then the number of favorable cases is $frac1n1binom2nn$, the $n$ th Catalan number.------Which flag will North and South Korea march under at the Olympic games?There is not much more to say than refer to you this wiki page about the Korean Unification Flag, which also happens to be the first page you would find when googling "flag korea olympic games".The flag represents the Korean peninsula in blue on a white background. You can see it held by athletes from both Koreas in Turin 2006 Winter Olympics games on a photo in this article that confirms it will be used in 2018 as well.Edit: As pointed in a comment by Shantanu Hebbar, the version of the Korean Unification Flag that will be used is the one without a dot for the contested Dokdo Islands (aka Takeshima, aka Liancourt) after a protest by Japanese Prime Minister Shinzo Abe. According to Wikipedia (without a source for this claim), Ulleungdo Island will not figure either, so it should be this version of the flag------What's the etiquette on looking at the other person's email when pair programming?There is no general rule: you have to discuss it with your pair.Pair-programming is a pretty invasive practice. You do not decide to invite a colleague into your private space to discuss something. Instead, you are supposed to give up your private space and share your desktop, screen, thoughts, on a regular basis: you work very close to each other. You set up rules along the way by telling your pair what he / she can do and what not. For each pair it is different. Some pairs work well together from day 1, some pairs take weeks or months to find common rules, some never do.The specific case of email really depends on your pair: some just don't care, some expect you to look away, some will read email during a break so you don't have a chance to see it, and so on------Is this attempt at a case-study question something we'd like to see more of?If it is a literary critique, I would vote to close as too localized if not off-topic. If it is a literary analysis then it's a different story.I would like when people show what (they think) works or does not work using a concrete example. However, a disadvantage is that only a minority knows the books in question, which restricts the number of people who can answer the question. Nevertheless I would give it a try.But to your "guidance" in your question:That's a bad idea. Meta Stack Overflow works this way and many people do not get it, do not want to understand it and love their rep much too much. Getting a downvote because stating one's opinion will drive people away. Meta.SO is only a meta site, so losing some people there does not hurt, but we shouldn't do that------Should a new programmer focus on a single technology until he's proficient at it? closedIt's not bad if he is a beginner in programming.He will see how some stuff work's. But if he doesen't understand the what he is doing it's better not to do it at all.I had that problem with myself i want to know it all Java, C, C, C#, Phyton, ASP.NET...etcbut i realized i can't know it all, so i focused on couple of things's and it's much better.So what should he do(advise him):I would not agree with @arnaud if you always explore and learn new stuff when a new project is in front of you(well not completely).It takes too much time to explore and learn new stuff again and again and some projects have a time limit. But on the other hand if you need to learn some simple new stuff it's ok :D .------CPU Constantly at 100% In Task Manager, But Not in Process ExplorerBefore, I used to be able to change the power settings like Andrew M had said. The fix that originally worked for me was to change my performance plan. Ex going from High Performance to Power Saver. Windows 10 >> Right click desktop >> DISPLAY SETTINGS >> (under system tab) POWER & SLEEP >> (Related Settings) Additional Power Settings. Or Go to "Ask Me Anything"/Cortana ( the start menu search feature and type in... "Power Options".OR EASIEST WAY ---> Right click the windows 10 logo/start button. Click "Power Options".I could swap between high performance and power saving and it would reset by itself, but for some reason when I opened skype the fans came on blazing and it would not go below 100%, so I did my method and it didnt change anything this time, ended up finding this backdoor/work-around. Works great, thank you. Andrews Response worked for me
The Vision Guided Robot Reduces the Production Cost of Components and Improves the Product Quality
The Vision Guided Robot Reduces the Production Cost of Components and Improves the Product Quality
Challenge: implement the picking and placing process, and carry out the transmission and quality control of raw materials and finished components on the production line at the same time.Solution: KWD will deploy the solution by combining Cognex's intelligent 3D locate image processing software, KUKA's modern robot and the precision machine manufactured by w-plan.Advantages: compared with the manually controlled inspection process, the product quality is greatly improved. The quality is significantly improved and the scrap rate is significantly reduced, which is conducive to improving the profitability and long-term competitiveness of the company.Robots move between steel plate components with extremely fast speed and almost playful ease. The welding system of KWD automobiltechnik GmbH, a subsidiary of schnellecke Group AG & Co.KG group in Wolfsburg, Germany, is making a new breakthrough in component production. The robot checks, picks up and places the steel plate at the welding station, and then picks up and places it again for additional testing. The precision machine made by w-plan, combined with connex 3D image processing software and KUKA's modern robot, solves this application of KWD. The precision machine made by w-plan, combined with connex 3D image processing software and KUKA's modern robot, solves this application of KWD. This visually guided picking and placing process performs the transmission and quality control of raw materials and finished components on the production line at the same time. Cognex has proven to be an ideal partner because of the unparalleled excellence of its 3D locate software in the industry. The 3D vision system reliably and repeatedly determines the component position, then detects possible defects in the side plate of the supply rack, and forwards the data to the robot controller.The robot controller uses the position information of the element to adjust the movement of the gripper in real time according to the direction of the element. As a result, the product quality is greatly improved compared with manual component inspection and positioning. Now, the workload of machine operators is mainly focused on the smooth control of the system, rather than the correct loading and unloading of components.Precise synchronizationThe application of 3D locate software in the automotive industry has been very successful because it handles difficult 3D problems in a step-by-step manner to ensure that customers seize every chance of success. In KWD, the whole production and quality management process of automobile side plates are closely monitored by 3D vision system. According to the different requirements of the operation process, a single or stereo camera is used to record the relevant image area. Cognex 3D locate software provides 3D position data in real time. The intelligent vision system uses patmax? From Cognex's comprehensive visual tool library? Geometric pattern matching tools and different 2D tools. 3D locate software addresses all three aspects of 3D calibration. It directly supports internal calibration and can estimate the parameters of camera sensors and lenses. In addition, it can also handle external calibration, which refers to the position of the calibration camera, whether it is installed on the robot end effector or fixed at a certain position of the robot unit. Finally, it also supports hand eye calibration, which refers to how the user converts the visual results into the robot mobile coordinate system.In the first operation, a robot positions itself with the gripper and the integrated vision system in front of the component library, in which small components are arranged horizontally on the conveyor. It measures the position of the elements and grabs each element in the correct position. The clamping action is completed in two steps. First, it passes through the vacuum suction element, and then the bolt pin is transferred to the appropriate position and the steel plate is fixed. At the same time, the second robot positions itself with the double-sided clamping system in front of the conveyor and the integrated 3D vision technology system, so that it can locate the large components placed on the vertical conveyor.The second robot checks the position of the transmission locking assembly and the measuring element and picks up the element in the correct position. Then, the two robots move to the loading station, a turntable, and place the components in the correct position in logical order.Comprehensive traceability and quality verificationAfter the spot welding robot completes the welding process, the first and second robots will perform optical spot welding inspection. The inspection content includes the quantity and position accuracy of spot welding. The 3D vision system checks whether the weld is placed in a predefined area. The system will check whether the root of the welding point is correct based on the welding control parameters. The data obtained from the test will be archived and the image will be assigned to the associated parameters. In this way, KWD automobiltechnik has achieved comprehensive traceability and quality verification of reliable records.To detect the component position, the 3D vision system must position itself with the protruding structure of the sheet metalIn the final working procedure, the second robot removes the finished welded components and places them on the finished component conveyor. If the finished components stacked on the conveyor reach the required quantity, the signal will be sent to the conveyor Logistics Department, which will collect the full conveyor and provide a new empty conveyor.Comprehensive inspection and satisfactionIn addition to product control, the new system will also provide an important service through Cognex 3D locate, which is the inspection of the predefined area of the system. In addition to the product itself, the 3D vision system will also check some starting and ending positions, such as the tensioning rod of the welding station. In addition, it will inspect the transfer claws of the container to confirm whether they are open or closed. Even under full load, the system can achieve significant efficiency improvement.In the implementation of 3D vision system, one of the biggest challenges is the light source. The various components of the side plate have no definite position on the conveyor frame, and they may twist or tilt in some areas. This leads to the changing reflection behavior of automotive sheet metal and bare metal. The solution is to construct an enclosure with a white interior wall through which white light is evenly dispersed on the metal elements and the maximum possible incident angle is achieved.After nine months of development and commissioning, the new plant is running at full speed on the basis of three shifts. However, KWD automobiltechnik is already considering taking further measures. In future systems, the 3D vision system will promote a significant reduction in the number of initiating stations. This will improve cost-effectiveness and minimize potential sources of error.
Days Required to Collide at Least One Hash? Closed
Days Required to Collide at Least One Hash? Closed
Suppose there are N different possible hash outputs. Then the probability of a particular hash colliding with k known outputs is k/N. The probability that it will not collide is therefore (1-k/N). If you have n hashes, the probability that none will collide with one of the k known outputs is (1-k/N)^n. For large N, that can be approximated with e^-(kn/N). So if you want a probability of .5, you havee^-(kn/N) .5kn/N -ln(.5)n -N ln(.5)/kln(.5) -0.693, so you have 0.693(N/k). Plugging in N 2^64, k 20,000 yields n 6.3931543 * 10^14. Divide that by 10^9/second, and that's 6.3931543 * 10^5, or 639315.43 seconds, or about 178 hours, or about 7.399 days.So every week or so, the probability of not having a collision decreases by a factor of 2: after one week, there's a 50% chance of no collisions, after two weeks, 25%, after three weeks 12.5%, etc.• Related QuestionsHow to nohup multiple SAS programs at once?I'm not a big fan of nohup (I use disown instead), but if you put nohup in front of each command in a shell script it will accomplish the nohup part of your question.However, I think your files are SAS programs? If you want SAS run in parallel on each SAS program:That will run independent SAS commands, each with it's own SAS program.Continuing with the nohup command, if they produce output, they will all be writing to nohup.out at the same time. To prevent that, write output and error messages to a separate file for each command:Added to include code from comments:To invoke the test.sh command either(where bash is your favorite shell) or mark it as executable:Since you're new, make sure and click on the checkmark if you think this is the right answer to your question------Keystroke to clear the current line at the promptIn bash you can bind the kill-whole-line command to e.g. CTRL-KThis does exactly what you want (from man bash):Put this to your /.bashrc if you want this behavior persistent.If you want to rebind CTRL-U you have to include the following line in your /.inputrcsee this bug report.In vim you can define a shortcut for 0D.You can test this in command mode (:) or put it in your /.vimrc or /.vim/vimrc to make it permanent. Choose a sensible shortcut for your needs, I used CTRLK to be consistent with the bash example. The imap line is used in insert mode, so you don't even have to go to command mode to kill the current line, i.e. this saves two other key presses. (I'm no vim crack, so there might be better ways to achieve this, but it seems to work...)------How, specifically, does the difficulty level affect the game?Gameplay changes that affect you as you change difficulty from Easy -> Very Hard -> Survival. I have tested most of this in game in a simple way. I've brought my melee character and have quicksaved before a scripted Swan fight. I found out a few things:Survival mode is even worse. Consider Survival mode "Extreme" mode. It features extremely tough enemies, as every single enemy gets huge damage and HP buffs, turning them into deadly bullet sponges. Ammo conservation actually becomes a thing in my survival playthrough, and in terms of playstyle, I found hanging back, slowly going through areas, and backtracking if enemies came a lot more useful. Explosives became very important, as well as mines, which were excellent at covering your ass when a Super Mutant is chasing you down a hallway and your entire clip of Laser Rifle ammo does absolutely nothing------Can I say 'I swam at the beach'?To try to haul my random thoughts into a semi-coherent ramble - though not necessarily an answer, per se...To a Br E ear, "the seaside" is the generic term for any coastal town, though particularly reminiscent of the heyday in the 50s & 60s of such as Blackpool, Scarborough, Margate, et al. - featuring pay-through-the-nose attractions such as the fun fair, candy floss, donkey rides, fish & chips, kiss-me-quick hats, poor beer & guest-houses with brushed nylon sheets.We would stroll along the Prom, listen to brass bands, risk the pier in high winds & rain, perhaps venture out onto the sand far enough to paddle in the freezing cold North Sea.An idyllic, though strangely overall dissatisfying experience; hence perhaps its decline as people in recent years have had more disposable income - so they can repeat exactly the same miserable experience in sunnier climes such as Benidorm------Probability of getting red ball at ith stepIt is important to understand this. Try to think in a way of: I draw all balls at the same time and then I give them at random the numbers $1$, $2$ etcetera. The one with number $1$ on it is considered to be the ball drawn first, etc.. Maybe that helps.EditPerson A and person B both are ordered to pick a ball from the urn. Habit of A: he takes the first ball touched by him. Habit of B: he touches $i-1$ distinct balls (let's say without looking at them) and after that he picks a ball distinct from the balls allready touched by him. Will B have a larger or smaller probability to pick a red ball? No. If B would have taken the touched balls out of the urn then it would be the $i$-th ball taken out that we are talking about here------Can Catholics serve as godparents at an Anglican infant's baptism?While elemtilas' answer indicates that Catholics might not be barred from being godparents in other ecclesial communities, as far as the Church of England is concerned there may be difficulties and the CofE parish priest must be consulted. Even then, it's not really clear whether the Catholic Church makes a distinction between witnesses to the baptism and godparents: if there is a distinction, then what follows here about Anglican rules is moot.(My emphasis)Confirmation here is confirmation according to the rites of the Church of England. That would cause problems for Catholics. The requirement for Anglican confirmation can be relaxed if the minister (that is, the parish priest of the Anglican parish in which the baptism is celebrated) agrees. The Church of England accepts Roman Catholic baptism, so if the requirement for confirmation is relaxed then Anglican canon law would allow Catholics to be godparents------Do we have to trust at least one DNS seed?What you are saying is correct.I'll quickly elaborate on why these hardcoded dns seeds are required. The attack you mention is called "peer list poisoning", a strategy that can be used to segregate someone from the network. There are two main types of peer list poisoning:You may think the DNS seed require an element of trust but it doesn't. There are ways to verify that a DNS seed is honest: if you run your own 24/7 Bitcoin Node with the right setup then your address should be available in a list returned by a DNS seed. They crawl the whole network and regularly revisits known nodes to check their availability. DNS seeds do not return a full list, so it's not very practical.There are alternatives to using DNS seeds, such as crawling the network yourself, or even bruteforcing IP addresses and attempting a connection------Prove at least two numbers $(a,b)$ exist such that $a|b$ or $b|a$.Yes it is true, but only if $n$ is even. There are a lot of counterexamples which are clearly mentioned in comments and other answers too that explains why $n$ can not be odd.HINT: Try pigeonhole principle.By factoring out as many $2's$ as possible, any number from the given set can be written as $2^k.a$ where $a$ is odd number and $kge0$.For example $122^2times 3$ and $3$ is odd. $282^2times 7$ and $7$ is odd. $332^0times 33$ and $33$ is odd etc.Now $a$ can be any odd i.e. $1,3,5...... $ From the given set and there will be $fracn2$ of such numbers ($a$). So whenever you select $fracn2 1$th number there must be two numbers having the same value of $a$. For example $l2^ptimes a$ and $m2^qtimes a$.When $p>q$ then $m|l$ and when $q>p$ then $l|m$------Are lightning storms more common at night?The answer is dependent on the geographical location. Over sea, there is hardly any diurnal cycle of lightning (this means that there is no time of the day when lightning is more/less often observed).In continental regions (e.g. Siberia), however, there is a strong diurnal cycle of lightning: it is most common in the late afternoon, and least common in the early morning.The third type of regions are regions mainly affected by mesoscale systems (as is the Great Lake region in the US): here, there is also a strong diurnal cycle, but the peak (most lightning) is shifted towards the late evening or early morning. Thus, to answer your question: in these regions, there is indeed more lightning at night.Reference:Blakeslee, Richard J., et al. "Seasonal variations in the lightning diurnal cycle and implications for the global electric circuit." Atmospheric research 135 (2014): 228-243.------Alternate Definition for Limits at InfinityThere are two problems with your definition.First, you're only requiring $f(adelta)$ to be larger than something you already know is a function value. This means that as long as the function only keeps increasing as $x$ goes to $a$, you will declare it to have limit $infty$, even if if there's some bound that it never exceeds. This is what commenter ah11950 was getting at with the example $f(x)-x$.Second, you're only requiring that there is one $delta$ that makes $f(adelta)$ large enough. Your definition doesn't prevent the function from dipping down and becoming small again between $a$ and $adelta$. So if you consider $f(x)frac1xsinfrac 1x$, your definition would say that it tends to $infty$ for $xto0^$ -- even though the analogous definition would also say that it tends to $-infty$------Why doesn't network-manager start at boot?The 'start on' section lets you know which events need to be emitted before upstart will start network-manager.In this case it's:Odds are the first two have already been emitted if you have booted to a desktop.static-network-up is emitted by the /etc/network/if-up.d/upstart script, crucially, the event will not be emitted unless every interface configured as 'auto' in /etc/network/interfaces is up.In my case I had a left over entry for eth0 in /etc/network/interfaces which was configured to use DHCP, but since there was no ethernet plugged into eth0 DHCP could never succeed.You can tell upstart to emit events and can use this to check if it is the static-network-up event that's missing.If this solves your problem check /etc/network/interfaces, comment out everything other than:Then reboot and hopefully network-manager will start as expected------Avoiding fallacies when analysing individual data at group levelAs mentioned, from the way you frame your question, you are aware and try to avoid ecological fallacy.A "problem" I can think of relates to sample size. Imagine your individual data has 100 people in both experiment and control groups. Say you only have one independent variable, then your degree of freedom (df) will be 100-1 99.Now you compress everyone in each corresponding group, and end with two only two summary scores, one belongs to experiment group and the other belongs to control group. Now you sample size is only 2, and your df is 2-1 1.Power, the probability to reject null hypothesis when the alternative hypothesis is true, depends on statistical significance criterion used in the test, the magnitude of the effect size, and sample size used to detect the effect. Compressing into group will reduce final sample size, which in turn, will reduce the power
The Costs of Dental Care and the Impact of Dental Insurance Coverage
The Costs of Dental Care and the Impact of Dental Insurance Coverage
Research has clearly documented that unaffordable medical bills and resulting medical debt affect large portions of the U.S. population, including a significant portion of those with health insurance. Previous analyses of data from the 2007 Health Insurance Survey of Farm and Ranch Operators showed that although the vast majority of respondents had health insurance, one in five had outstanding debt that resulted from medical bills and one in four reported that health care expenses contributed to their financial problems. However, these analyses did not include data gathered in the survey about dental insurance coverage and out-of-pocket costs that resulted from getting dental care.There is little research on the contribution of dental costs to people's difficulties paying medical bills or their likelihood of accruing medical debt.This brief presents basic data on the costs of dental care, the prevalence of dental debt, and the impact of having dental insurance on the costs of dental care, access to care, and the likelihood that people will experience financial hardship because of health care costs.• None Three-quarters of survey respondents reported having any dental out-of-pocket costs; percentages were similar for those with (73%) and without (77%) dental insurance.• None Dental out-of-pocket expenses constituted more than one-quarter (27%) of overall health care out-of-pocket costs. The overall average amount of out-of-pocket health care costs per household for medical, prescription, and dental care was $3,231. The average for dental out-of-pocket costs was $873. Dental out-of-pocket costs exceeded the average amount of prescription out-of-pocket costs ($700).• None Seven percent of respondents had debt resulting from obtaining dental services. The average amount of dental debt was $1,018 and the median amount was $500.• None Forty-two percent of respondents had dental insurance, lower than the national rate of 60 percent. This reflected the high percentage of respondents with non-group insurance (36% of our sample compared to 60% nationally). People with non-group insurance were much less likely to have dental insurance than those who obtained insurance from off-farm or off-ranch employment.• None Factoring in the estimated cost of premiums for those with dental insurance, the average amount spent on dental care was similar for those with ($978) and without ($1,007) dental insurance.• None Although the amount spent on dental care was similar for those with and without dental insurance, those without dental insurance experienced much greater variability in their dental expenses. Those with dental insurance thus experienced greater predictability in their dental expenses and were less likely to face extremely high dental costs.• None Seven percent of respondents said they delayed dental care because of cost; this included 45 percent of those respondents who said they had delayed any type of medical care. Those without dental insurance were significantly more likely to have delayed dental care than those with dental insurance.• None Having dental insurance somewhat reduced the likelihood of people experiencing financial hardship because of health care costs. Financial hardship was defined as 1) spending more than 10 percent of household income on health care or 2) reporting that health care expenses contributed to financial problems.i lossed my truck keys when working out in LAFitness ,a guy found them and stole my truck, he was not a member?Rammer You can sue anyone. But this one has no merit. That is why you have insurance! What negligence did they exhibit. As you stated, the guy had to sneak (break) in to the gym. You take things in at your own risk. You had all of these items left in the truck... did you even use a locker? If so it was broken into by breaking your personal lock! Your complaint is with the insurance company. If you had homeowners insurance some may also be covered there too. SoccerrefIn a car accident what should I do, legally speaking?that's what insurance is for - you pay for their people to handle this stuff for you. If you do not have insurance you will have to get a lawyer at your own expense, although ambulance chasers like John Edwards (D) will sue on contingency then take 40% of what you getIs this a good choice to liquidate a house and then buy another?Why settle one house then get a loan for the 2nd. Why not just take the 80K and buy a new house (and save the closining costs for a new loan). Also your expense projections seem low. You must include insurance, hoa fees (if any), vacancy (at least 10% of rent- maybe more, though honestly maintenance seem real high so maybe the $2500 could cover maint and vacancy), if you are not managing the property 10% for professional mgmt (if you are managing it - be very careful and get a good tenant), and mortgage if you are not paying it off. However, after saying all that I think this is a fine idea. If you can stick with it and ride out your mistakes this is a slow laborious path but one to huge wealth (if you are lucky). Of course what advice did you expect here - this is the Renting/ Real Estate Board.
How to Use Manufacturing Automation to Cut Costs
How to Use Manufacturing Automation to Cut Costs
How to Use Manufacturing Automation to Cut CostsThe term automation can be applied to any mechanism or device that moves by itself or is self-directed. Industrial automation uses a set of technologies such as PCs, PLCs, and PACs as well as various industrial communication devices and systems. Utilizing these technologies, we can automate a variety of industrial systems to control everything from liquid and air flow pressures to temperatures and flow rates efficiently and simultaneously. The backbone of an industrial automation system is its control system. A control system utilizes control loops to direct or regulate the behavior of other devices or systems. Closed-loop control techniques use feedback from sensing devices to ensure that process variables maintain and follow a setpoint. In addition to this basic functionality, an automation system can perform other functions such as computing setpoints, monitoring and reporting process performance, quality control, and equipment maintenance scheduling, among other tasks. In doing so, an automation system ensures that the manufacturing process is efficient and reliable, that downtimes are reduced, and that data reporting is accurate. The Beginnings of Automation and Impact on Manufacturing Production Costs The first known automated feedback-controlled mechanism that did not need outside intervention to operate was a float regulator for a water clock. It was invented around 270 BCE by the Greek inventor Ctesibius. The clock was the most accurate time-keeper of its day until the Dutch physicist Christiaan Huygens invented the pendulum clock in the 17th century. In 1785, American inventor Oliver Evens invented the first fully automated flour mill located near Newport, Delaware. Driven by waterpower, the mill is known to employ the first continuous industrial process. It reduced the need for human labor and increased the amount of flour that could be obtained from a given amount of grain. At a time when manufacturing production costs were mainly derived from labor, raw materials, and waste, Evens' invention was a game changer in that it significantly lowered the cost of production. Today's manufacturers have many more production costs and complexities to consider as part of the manufacturing process. They must comply with regulatory requirements and meet stringent product quality standards. Fortunately, the developments in automation have kept up with the times, and automation is now an integral part of the modern manufacturing business where it continues to be used to cut production costs. Facilities today use automation to quickly change batches or recipes, produce reliable process verification's, trace production data, and even track energy consumption. As advances in automation continue to dominate the manufacturing industry, some have voiced concern about the negative impact of automation on the future of human labor. I can personally attest that automating the manufacturing process is not all about replacing workers as some fear. Rather, it is about making workers' lives easier. I have been in manufacturing facilities that have a lot of automation throughout my career as a professional systems integrator. It is not unusual for an operator who is performing a manual task to ask me a question that usually goes something like this: "I hate this part of my job - is it possible to automate this?" Through reducing repetitive manual tasks, manufacturers can free up their workers to perform higher level operations. Thanks to advances in sensors, smart devices, software, and machine learning technologies, automation can streamline a manufacturer's production line and increase the production rate at the same time. It drives down the amount of product waste produced so that the product quality is maintained. Another critical benefit of automation is that it can be employed to reduce unscheduled downtimes. While many manufacturers forgo implementing this functionality due to the initial costs involved, I believe the ROI could be substantial. Employing automation to reduce downtimes could be as simple as programming a machine to watch the run-times on motors or to determine how many times a valve has cycled. The system could automatically send maintenance a message, informing them, for instance, when a piece of equipment on the production line needs to be scheduled for service. Alternatively, this process could be more complex and utilize sensors and software with machine learning and be employed to detect small issues like air leaks. Or, it could be more predictive, programmed to send out alerts to predict equipment failures within months, days, or even minutes. It's common to want to shy away from using automation for quality control within manufacturing and instead rely on human inspections and other manual quality control methods. The manufacturing industry still relies on human based quality control for a variety reasons, foremost among these is that it is still assumed that the human eye and human ability to pay attention to detail is far superior to a machine. However, with the current advancements in automation and vision systems, automated quality control now far outpaces human facilitated manual inspections. It is faster, more consistent, and more cost-effective. Machines do not have the weaknesses of their human counterparts - they do not suffer from fatigue or get lost in thought and make human errors. Thanks to the development of 2D and 3D vision systems, we can now inspect for product size, shape, and color, all without relying on human labor - the possibilities are endless. Even bar code reading vision systems now ensure the right label and packaging for a product is always displayed correctly and accurately without the need for human intervention. Long gone are the days of manual data entry. Operational excellence is now executed with real-time data acquisition. Manufacturers can quickly make changes to their production lines, reduce waste, and lower production costs. They can track customer complaints or quality issues back to their origin and resolve them faster and easier through data logging and historical data collection. Manufacturers can use the collected data to prevent future quality control issues and eliminate risks that might hurt their businesses (such as a product recall). Historical data can also be a useful tool for identifying bottlenecks on the production line.
How to Create Childs Hedgehog Costume in 9 Easy Steps
How to Create Childs Hedgehog Costume in 9 Easy Steps
You will need: • None I chose an adults small hoody. just pick a hoody that is large and will cover the body so that it can be just worn with leggings or tights • None I also picked up a couple cheetah print ones to as a design feature • None Again, good old faithful hobby craft do a bundle for cheaps: Glue gun bundle • None I folded the A4 sheet in half to get an idea of where the middle was in order to cut in half • None then cut zig zag line down the middle of that (please see below) to create strips of hedgehog quills. • Fold back the raw edges and machine stitch all the way around the rectangular headband, creating a neater edge. Step 7 Cut out a felt rectangle the same size as the finished headband. ¹ Between a board room inspired name that's meant to attract 'the kids,' and Sony's attempt to SEO hack all of their products, these naming schemes are only getting worse.² aka, mind the gap, if you live in London. Can wear for an hour or more comfortably. These controls are also a little confusing when the headphones are on your head, will take time to learn.You will need: • None I chose an adults small hoody. This can vary depending on the size of the child or even adult! just pick a hoody that is large and will cover the body so that it can be just worn with leggings or tights • None I also picked up a couple cheetah print ones to as a design feature • None Again, good old faithful hobby craft do a bundle for cheaps: Glue gun bundle • None I folded the A4 sheet in half to get an idea of where the middle was in order to cut in half • None then cut zig zag line down the middle of that (please see below) to create strips of hedgehog quills. • None I also folded a couple of the sheets widthways into 3 to create smaller zig zag strips for the head. • None I firstly aligned the zig zags in a steeped fashion in alternating colours to create a depth of texture • None Make sure that the spikes are off centre from each other to build up the quill section as show below • None Add in a row of the 'cheetah' felt every 3-4 rows for colour depth. • None Once happy with the positioning dispense a line of glue onto one side of the straight edge of the felt and glue directly to hoody • None Continue up on to the hood and leave the arms free • None At the mid-point of the head lay the quills face the opposite direction so that the point face towards the head • None To make an even simpler version of the costume follow these section then you are done! • None Cut an ear shape out of the light felt and a smaller inner ear shape out of the dark felt. These need to be bigger than the quills so that they are distinguishable. • None Pinch the bottom middle of the ear with the inside on the inside and glue at the bottom to create volume • None glue the ears in to place • None Firstly cut inside the line where the sleeve meets the armhole to remove the sleeves • None Keep these bits of fabric to cut the ears out of • None Create an ear shaped template like the one shown below, approx 10cm in diameter or whichever size best suits the size of the head. This is so that the ears are the same size. • None Pin to the arm fabric and cut 4 • None Cut a smaller ear shape out of the cashmere coloured felt to create an inner ear. I zig zag stitched this into place but you could also glue this onHow to Make Bear Ear CostumesEveryone likes bears, from teddy bears to polar bears to Care Bears. You can make your own bear ears headband for a costume using just a little fake fur and some machine sewing. Making a headband of any animal ears is relatively simple. For bear ears, use fabric in brown or black (or white for a polar bear). Of course, you can also make any color of bear ears you like if, for instance, you are putting together a costume for a Care Bears outfit. Step 1 Cut out four circles from the fake fur. Make the circles approximately 4 inches in diameter. This gives you enough circles to make two ears, with two fronts and two backs. Then cut off the bottom edge of the circles to make a short flat distance for the base of the ears. This should give you roughly a 2-inch bottom edge. Step 2 Pin the ears together with the right (furry) sides together. Make two ears this way. Then sew around the curved edge of the ears, leaving the flat edge open. Step 3 Clip the curves, and turn the ears inside out. Now you have two ears ready to be attached to a headband. Step 4 Cut a rectangle out of the fake fur that is long enough to go across the top of your head and down the sides. Make it approximately 10 inches long by 4 inches wide. Lay the rectangle on top of your head, and mark where you want the ears. Cut slits about 1-12-inch slits at those locations along the center line of the headband. Step 5 Squeeze the flat end of the bear ear into the slit. The fit should be tight, requiring you to slightly fold (or pleat) the ear. This will give the ear some realistic dimension, rather than being a flat circle. Sew the slit closed, catching the ear to hold it in place. Repeat with the second ear. Step 6 Turn the headband over, so you are looking at the wrong side. Fold back the raw edges and machine stitch all the way around the rectangular headband, creating a neater edge. Step 7 Cut out a felt rectangle the same size as the finished headband. Sew the felt onto the bottom side of the rectangle, making a neater finish to your headband. Step 8 Sew on elastic or strings at the narrow ends of the headband. Either use a single piece of elastic, forming a loop across the bottom of the headband, or sew down two strings that will be tied under the chin.Meet the Sony h.ear on 3 Wireless Noise Cancelling Headphones (WH-H910N)The h.ear on headphones have always been about funk and color and at IFA 2019 in Berlin, Sony did not disappoint. Dubbed the h.ear on 3, or as it's officially known by its sleeker name, the Sony WH-H910N h.ear on 3 Wireless Noise Cancelling Headphones¹, the new series offers a splash of new colors alongside improved tech. Starting with the latter and working our way back, the h.ear on 3 headphones now offer both Google Assistant and Amazon Alexa as your virtual companion, which can be set and adjusted via the Sony Headphones Connect app on iOS and Android. Either assistant can be summoned by pressing and holding the noise cancellation button. Speaking of noise cancellation, Sony has improved that aspect of the headphones as well withdual noise cancellation microphones - one feed-forward and one feed-back - on the surface of the headphones catch more of the ambient sounds of your surroundings, whether it's in-flight noise, city traffic or office chatter.If that was not enough, Sony is also introducing Adaptive Sound Control, which can detect the activity you are partaking in, like "travelling, walking, or waiting" and adjust how much ambient sound makes it through. And if you are onboard a plane, train, or automobile, by placing your hand over either headphone cup, the noise cancellation will dip to a minimum which will allow you to more easily hear things like announcements. ²For those on the go, the h. ear on 3 offer 35 hours of battery life and when plugged in can get you 2.5hrs worth of charge in just 10 minutes. Unfortunately, the headphones still utilize micro-USB and not USB-C.Over the past year or two, colors have definitely been in and the Sony h. ear on 3 lineup offers quite a bit of variety with red, blue, green, orange, and black. The new headphones are priced at £250 / €289 Ireland and arrive some time in December 2019. No word yet on US pricing or release date, but a similar timeframe and $300 is the most likely. ¹ Between a board room inspired name that's meant to attract 'the kids,' and Sony's attempt to SEO hack all of their products, these naming schemes are only getting worse.² aka, mind the gap, if you live in London.Thanks for being an SRN reader. If you liked this post and want to help me cover Sony even more with reviews, videos, and podcasts, please clap (you can more than once!), share on your favorite social sites, and subscribe to the SRN newsletter.Sony h.ear on Wireless NC (2016)TechGoodLove the colours.Super comfortable, especially compared to other super-tight fitting over-ear headphones, like Beats by Dre.On a similar note, they pass the glasses test, so even people with bad eyes can wear them comfortably.They fold up a little, but not a lot.There's an optional cable for when you run out of juice. The battery life is surprisingly good. They sound great. I would happily choose these over, say, in-ear headphones, especially on public transport. Worth the difference in portability.Can wear for an hour or more comfortably.Noise reduction makes so many situations much more bearable, and it does not use too much power.A voice will tell you the battery life if you press the power button. Neat feature. BadI would say overpriced. Could never see myself paying $499. 95 for headphones. Even the similarly expensive, though less colourful Bose QuietComfort 25's are now available for $399, with almost identical functionality.They do look a little bulky, but that depends on your own look. Try them on in front of a mirror if you care about looks. Just like all Bluetooth / noise cancelling headphones, charging can be a pain. If you are an Apple user,sure you bring a micro USB cable with you wherever you go.The colours may not be everyone's cup of tea, and there is not a white model. There is a black model though. Out of the included case they can get scratched up, which is likely more noticeable with the colour versions.Can feel a little heavy on the top of the head I guess, but that's like any pair of on-ear headphones.Noise cancellation does not mean complete silence, just less ambient noise. Music controls do not seem to work on iOS unless you are in Bluetooth mode.These controls are also a little confusing when the headphones are on your head, will take time to learn. The slight difference between turning on noise cancellation vs the power button is also a little annoying. Bose put a really obvious switch on the side of their headphones to help with this.I do not know what the LED indicator ever means. Sometimes it flashes red, sometimes blue, but do not know why. If you travel a lot and can spend $499. 95 on headphones, I would go for these. I love the colours, noise-cancellation works like a dream, battery life is great, and they feel comfortable, even with glasses on. Though for $399 (at JB Hi-Fi) the Bose QuietComfort 25's are probably just as good, albeit less colourful, and cost $100 lessTop 5 Celebrities Style Approved Trend to Wear Ear CuffsIf you are wearing the same studs and danglers at all events, it is time to try something new to your jewellery box.Earcuff is a latest accessory in town.With fancy earcuffs you can add a fierce, sci-fi element to your outfits. Ear Cuffs are really easy to wear as well as very affordable. Moreover, there is no need to take painful piercing, yayyy!!!Though it is so tiny in size, its impact is great. From minimalist, delicate designs to more extravagant and bold designs, we have found few A-list Bollywood actresses pairing stylish ear cuffs at various events. Ear cuffs worn by these celebs show off an unexpected bling dimension in jewellery extravaganza. Below is the list of top 5 Bollywood actresses who are our current celebrity ear crushes:Sonam kapoor is at the top of the list. Being a Bollywood fashionista, this lady lived upto her image and enhanced her look by wearing drum shaped golden ear cuffs at red carpet event.We like this ear cuff style of Piggy Chops which added a subtle and unexpectedly elegance to her personality. It seems like; it is her favourite piece, as we have found her wearing this same hanging earcuffs at various events. Are you tempted to wear such style???The dabang girl was featured in Daboo ratnani's calendar. She opted to wear spiky earcuffs on both ears. Sonakshi sinha is regular in wearing different styles of ear cuffs and we really like her style.Her effortlessly classic, slightly bold style represents the notion of true, a modern-day style icon in the Bollywood industry. big leafs golden ear cuff is also available on Amazon here:Buy Via Mazzini Inspired Fohawk Leaf Gold Ear Cuff Earring for Women (Single Piece) Online at Low...Amazon. in: Buy Via Mazzini Inspired Fohawk Leaf Gold Ear Cuff Earring for Women (Single Piece) online at low price in...www.amazon.inVidya balan is smart enough to maintain her traditional saree avatar. Well, she proved that ear cuffs can go well with even ethnic wear such as sarees, anarkalis and lehengas. Few Indian models flaunting Indian ethnic outfits along with ear cuff.Now that we have unlocked the latest Ear Cuff trends and how to wear it, be sure to try out the trend yourself. You can add a tinge of style to your traditional ensembles and ear-cuffs are a great way to go about that. So what are you waiting for, grab a saree or salwar suit and team it with a pair of ear cuff at an upcoming event or festival
Office Supplies Were Sold by J's Appliance Repair at Cost to Another Repair Shop, with Cash Received
Office Supplies Were Sold by J's Appliance Repair at Cost to Another Repair Shop, with Cash Received
Office supplies were sold by J's Appliance Repair at cost to another repair shop, with cash received.?It would be A. The reason for this is simple: The Office Supplies are being sold which results in a Debit. The cash is being received which creates a credit for cash. It does not matter that it is at cost or not.— — — — — —What "turns you on" that ISN'T Food? My weakness is office supplies! When I get a brand new fine point SharpieBooks. And yeah - office supplies are really up there, too!— — — — — —first year of high school.... what kind of 1. office supplies 2. misc stuff should i get/bring?ok on the first day just bring a pencil and paper/notebook. each of ur teachers will tell u exactly what u need and u need to write them and create a list and go shopping after the first or second day of school depending on what ur classes are like. so do not worry on the first day no one will have anything unless they are a loser lol.— — — — — —What's your favorite office supply?I really like hi-lighters— — — — — —Have you ever seen a new employee stealing from the workplace?I had been with the company about a year when they hired an intern. Hank had a new briefcase that he would carry one or two folders in. In about a week, that baby was bursting with office supplies. Staplers, pads, pens, pencils, notebooks, index cards, even batteries. All were taken from the supply room, which back then was open to everybody. I do not know if it was really stealing, because he figured the company intended to stock everybody's briefcases as part of working there. But he cold have started his own office supply store. Maybe he is the CEO of Staples now!— — — — — —Looking for tips for better usage of office supplies - to cut cost . . .?Depending on the type of business you are in there are several ways of cutting costs. One is having everybody accountable for their own supplies. This will keep down shrinkage. I know it seems childish but it works. You could also charge (or threaten to) for over usage of office supplies. When employee's see their taking/abusing office supplies hurting their pockets then they will try to reserve supplies.— — — — — —What are the names of some OFFICE supplies?paper pencils pens staplers— — — — — —Which office supply item do you most identify with?Dry correction tape.Dry correction tape provides immediate rewritting after correction & it leaves no messy after-effect— — — — — —If you're getting someone office supplies as a gift, how do you make it not look tacky?Well the first that came to my mind, is that you need to have either a really showy wrapping style, or to go the other way and have all of the items tucked inside some form of storage container for a desk. I would shop and compare first of all. If you decided to go the basket route, then before you pay full bore thru a store selling them for more, go to your best thrift store, like Goodwill, and scout out their basket and wood items for a nice oblong box or basket to hold everything you've bought in. You can pick these up for under $5.00 if you can find that specific shape. Later, it can be used for a waste basket, so look for that taller size. You would pack it with the shredded paper strips you buy at any store carrying gift wrap. Or you can do your own with strips of newspaper from the Sunday colorful cartoon section and maybe tissue paper above that to hide the contents. Then put a supersized bow on the outside of the basket in a bright color or multi colored bow. If you can not find an appropriate basket, you should go to a place selling storage containers, or a kitchen accessory store, like Kitchen Kaboodle that is a chain. Look for a container there to use for a waste basket or a upright divider for paper storage or flat storage of some kind. I remember seeing different shaped things in colored metal and wires and also plastic things. And such color choices. So I would check with both venues and see what the best is you can come up with and then make the practical choice. Always think of using your packaging container for a practical use after it's held the presents that are small and awkward to put into a normal gift box. I hope I've given you some practical and useful ideas.
How to: Yarn Wig for Costumes  Fantasywoods
How to: Yarn Wig for Costumes Fantasywoods
How to: Yarn wig for costumes – FantasywoodsHello guys. Ca not believe how fast the time has gone this year. Halloween is behind us already, but I still wanted to show you how to make the yarn wig I used on Ailene's rag doll costume. No pattern needed for it. It wo not work as an all day wig because of the way it's constructed, but it is perfect for costumes. I apologize because the quality of the photos is not too great, I did this wig when there was not much light and next to my computer so the conditions were not good to take photos. I tried to fix colors on Photoshop, but by making Ailene and the materials look good, I made my hands look kind of zombie-like hahaha. I swear I have healthy hands. Now onto the tutorial You will need: • Yarn of the color of your choice. I used a thin one to make it look more up to scale, but you could get away with a thicker one as well. • Thread, preferably the color of your yarn, or as close as you can get, in my case I used white. • A piece of fabric. It can be a scrap, you do not need much. • Ribbons or anything to decorate. To start the wig we need two measurements from your doll's head: First we measure from where the wig should start at the front straight to the back. Second measurement is how long we want our wig to be from the center part of the head. I went for 12 cm. long. We use the first measurement to cut the piece of fabric. We only need a rectangle really, we wo not be making a wig cap. Then we cut several pieces of yarn doubling the size of the hair length. In my case hair is going to be 12 cm. long so I cut the yarn 24 cm long. Cut enough yarn to cover the piece of fabric. In the photo you can see how much yarn I cut at first, but in the end I used a lot more. The thicker your yarn, the less yarn you will need. Pick a few pieces of yarn and sew them to the edge of the fabric. This will make the hair stay in place very nicely, but it will still move to the sides if you pull too hard, so be careful. Keep sewing group of hairs little by little. It seems like it will take forever, but it's quite fast. If you enlarge the photo you can see the first part of the wig I was passing the thread twice for each group of yarn hairs and the thread was too notorious so I started passing it just once and it looks much better. Learn from my mistakes and do not over do it. Once you reach the other end it will look like this. I cut the edges of the fabric a bit on the side I decided was going to be the front part so it would not show on Ailene's forehead. Now it's looking more as a wig. Place it on your doll's head to see how it's going. The wig wo not stay in place at this point and that's okay. With the same thread you used to sew the hairs, secure the pigtails. It is hard to do when the wig does not stay in place so feel free to keep it in place with the help of a second person or masking tape. I did not use anything or anyone but it took me a while to get the tails right. Once the pigtails are secured you are free to decorate them with whatever you want, I used a cute red ribbon. Making the pigtails will make the wig stay easier on the doll's head, but if you still have trouble when taking photos, you can hide a tiny piece of masking tape inside or use a silicon wig cap. If you want to go for the rag doll look you can add red cheeks to your photos using Photoshop or any other photo editor program. My way is really simple but it wo not look that realistic. In any case is a fast and cute way to do it. I created a new layer on top of the photo and painted some big red cheeks using a brush. Then I set the layer on multiply and played with the opacity of the layer until I was happy with it. The end result, most of you saw it already in my last post, but here it is: Hope you guys enjoy it. And if you want to give it a try let me know how it went
How Much Do Hair Extension Cost Usually?
How Much Do Hair Extension Cost Usually?
I went to an expensive salon, Im a white female and wanted someone who had worked with white hair and fusions aka the glue. I got Great Lengths extensions, which is the type of hair. And I paid 1300 dollars and that didnt include removal. The process took 12 hours. Two separate days. It also included dying my hair and cutting it prior to ordering the hair, so we got an exact match. And also the price doesnt change much if you change the length. I got 12 inches added. And I started with hair that was like 3 inches long and ended up with hair half way down my back. The salon I went to was Pave' and owned by Ken Pave' whom is jessica simpsons hair stylist. But I am sure you can find something much cheaper. Hope this helps.1. What do you think of the feather hair extension trend?yes, i think they are overdone. And also, the animals die in the feather plucking process, so just think about saving them, by saying no to feathers2. How do you make a battery powered barrette? Fiber optic hair extension clip?Cool idea! If you are good at crafts you might be able to do it. If not, try anyway, learn and have fun. The premade battery powered barrette is just an easier place to start for most people making a hair accessory. You could do the same thing with an ordinary barrette, the battery holder, the LED light source, and a glue gun, Unless you are good with electronics, it might be best to start with a LED light kit from a hobby store or reuse the parts from some other party item. Check out second hand or toy stores for parts.3. Cute, fast, easy, messy hairstyles?Put on a headband with or with out bangs. Then many times use hair clips on the edges to get it out of your face even as you read textbooks. Do a ponytail, but have bangs with it on the perimeters. And repeatedly - use a clip on hair extension in wacky colors like blue, orange or purple.4. Cheap hair clipin hair extension ?i have clip in hair extensions too, but unfortunatley they do not have any clip-ins with real hair for under 50 dollars. they are about 120 dollars at least. all of the ones under 50 dollars are fake hair and you should not waste your money on those because those look really fake5. is it better to buy wavy hair extension or just style them yourself?style them yourself because if you just buy them the way they are they might not suit your face whereas if you style them yourself you will know what suits you and what does not6. Which color hair extension/streaks should I get?I Think you should go with the pink...if you like It Go with it! your the one who is going to have to have it, not your boyfriend7. Will metal hair extension clips cause a problem as far as airport security in Israel?you will be surprised but at the israeli airports you do not have to take off your shoes, belt or other stuff. you can bring liquids into the airplanes. Israeli airport security is based on profiling and questions. meaning that they will look where you came from, where you have visited, what is your origin, your age, and will ask you few questions. they will check how you react, and ONLY if they suspect something is not right, they will take you to a different room where they will ask you to open the luggage and will pat you. if you have family or friends in israel, having their phone number at reach is the best option. so far no one managed to bring weapons or bombs into a flight that leaves israel. so i guess it is working.8. Tape-In Hair Extension Benefits and Removal TipsDid you know? The first hair extensions date back to 5000 BC in Ancient Egypt. Everybody loves to make their hair look beautiful and especially women long for beautiful and stylish hair. Even if you do not have long and beautiful hair does not worry, hair extensions like Halo extensions Melbourne will come to your rescue. The hair extensions Melbourne or the hair integrations are used to add length and volume to your hair. These hair extensions come in a wide variety of colours and styles enabling you to have a custom look anytime and anywhere. The hair extensions especially tape hair extensions Melbourne have become a popular method for clients, stylists, and celebrities. This blog explains in detail about the handling tips and the benefits of the tape hair extensions. Why Are Tape Hair Extensions The Best Hair Extensions? Hair extensions make you look and feel better. There are so many hair extensions readily available in the salons, but when it comes to the best hair extension, hands down the tape in hair extensions is the most requested in hair salons worldwide. The following are the reasons why tape hair extensions Melbourne is the best hair extension method, Tape hair extension is the least expensive semi-permanent hair extension method. The structure of the tape wefts and its application in your hair makes the maintenance costs associated with this type of hair extensions much lower than any other semi-permanent methods. Generally, the tape hair extensions are 1.5 inches in width. Thus they are easy for wearing and maintenance. You can wash and blow-dry the hair extension which is not possible with other types of hair extensions. The tape hair extension is weightless and does not pull your original hair creating discomfort. You also do not need to worry about the loss of hair with these types of hair extensions. Being able to reuse your hair extensions is such an advantage, especially if you have had your extensions customised with your favourite cut and colour. After removing the tape, you can clean and replace it with a new tape. The tape-in hair extensions suits with any hairstyles like braids super high ponytails etc. They are very thin and adapts with your natural hair, making them look like your natural hair. The following tips are mostly universal, and it can be used for most tape in hair extensions. When removing the tape in hair extension panels complete the removal from the hair first and then remove the tape from the extension panel. The removal solution should be of high quality, as most of the removal solutions temporarily neutralise the stickiness of the hair extension tape. Putting two sticky parts of the panel back together will ensure nothing else gets sticky during the process. Make use of leave-in conditioner spray as these sprays are creamy and water consistent. Thus choose the tape-in hair extensions for a longer, fuller and more voluminous style.
Tips on How to Avoid Costly Air Conditioning Repair
Tips on How to Avoid Costly Air Conditioning Repair
Air conditioning is one of the most expensive investments anyone has to make. And if there is a problem with it, everyone stops. We humans cant always tolerate the excessive heat we are experiencing during the hot summer months.So you bought an air conditioning unit. How can you be sure it will run continuously at its maximum capacity with minimal power costs?Below are some tips that came from old school engineers and new innovative technologies guaranteed to help you get the most out of your ac unit, lowering operating cost and avoid expensive repair expenses.Keep the unit clean Small window type units have filters at the front. It is easy to clean those. It will surely help if you clean them every month. Not only you are maintaining the air quality of your room, you are helping the blower to move more freely and be cool as well (clogged fans may overheat)Provide a maintenance program This is another important decision that you must perform if you have bought an air conditioning unit. Qualified maintenance personnel will thoroughly clean the unit and even check the parts for wear and tear. This is called preventive maintenance. This is very important if you have large centralized units installed. For small window type units, you can do it every 6 months.If your air conditioner is old, you may want to think about changing it out for a newer one. Some of us are simply nostalgic when we have these old units working for us. And some does not have the time to replace it also. But whatever the reason is, if it is over 20 years old, better change it completely. Yes it is expensive and a time consuming process. But we are pretty sure that the new unit will run for another 20 years, and, it will save more on power costs. One more thing, if its old and has broken parts, chances are, it is already obsolete and replacing them with replacement parts is big gamble. Learn moreMy AC Repair Orlando51 E Jefferson St #1457Orlando FL 328014074998942.·RELATED QUESTIONHow much would AC repair cost for 2002 Chevy Cavalier? (possible reasons for AC failure below)?None of these "diagnoses" pretain to air conditioning. Methinks it is the condensor, or compressor
sin datos
Aminica Wigs are dedicated to providing top quality virgin human hair for large trader and wholesaler. Usually they resell it to the retailers then to customers, which results in high price that makes customers awe-stricken.
Contact Us

+86 020-22139352

If you have a question, please contact at contact

Copyright © 2021 Aminica humain Wigs |Sitemap